High Quality Endless Press Felt for Paper Making Machine

Press felt is an important consumption material in papermaking industry. It is mainly used in fourdrinier paper machine, cylinder paper machine, paperboard machine to transfer wet paper and dehydration. It can be divided in single layer felt, double layer felt and triple layer felt.

As THE LARGEST SUPPLIER of PMC paper machine clothing(the northern Jiangsu area), we’re not only sell items, also supply all-in-one solution of PMC. We can provide dryer fabric, forming fabric and felt for you. We can promise you the best rate and professional services.

Availability:

Quantity:



Inquire Add to Basket

Model:
SUN HONG PMC
Brand:
SUN HONG

Product Description

横幅_副本

Endless Press Felt

Sun Ho Group has single, double and triple ply felts for a wide range of paper machines with good stability and longevity.

According to paper machine and paper, we can change the structure of base mesh. Paper machine felt has the characters of anti-high pressure, good elasticity and filterability, stable size, small elongation, great strength, affective to eliminate grooving, vacuum mark, blind-hole mark and other marks.Suitable for vacuum presses, various laminating presses and other presses for the production of high-grade offset paper, as well as various high-grade paper and cardboard.

press felt joint1

Application

1.Forming paper web.
2.Dewatering from the paper web.
3.Conveying paper web.

fourdrinier

Type of Press Felt

Single layer felt Double layer felt Triple layer felt

Product parameters

Layer	single layer	double layer	triple layer
Paper machine	all kinds of machine	all kinds of machine	all kinds of machine
Speed	≤800m/min	≤1000m/min	≤1000m/min
Paper	≥8g/m²	≥8g/m²	≥40g/m²
NIP	≦80kN/m	60-200kN/m	≧200kN/m

Installation of felt

微信图片_20220922174141 01 Keep the felt clean to prevent oil from sticking to the felt.
02 Before the felt is flattened on each roll, it is not allowed to drop the top press roll, couch roll or support roll. Never pressurize the press roll until the paper machine is running normally.
03 When the felt is running slowly until it runs well, wet the felt evenly with water until it is saturated with water, The tension is then adjusted to stretch the felt to the optimum length, width and dewatering conditions.

04 There should be sufficient clearance between the spokes and the bushings or between the spokes and the spokes to allow the felt to cover easily and to avoid pulling the felt in through the gap.

05 Before starting the machine, check whether there are foreign matters on the top and bottom of the felt, as well as pressing and auxiliary devices.
06 The running direction of the felt on the paper machine should be marked by an arrow on the surface of the felt.

微信图片_20220922164349