Paper Making Machine 12m Width Nylon Seamed Felt

Papermaking seamed felt is an indispensable dehydration equipment for both wet end and press end in modern papermaking. The paper-making seamed felt is loaded on the press roller on the paper machine to carry and transfer the paper. The paper-making felt can be used to removes the moisture from the wet paper sheet by squeezing or vacuum suction with pressure rollers, which can modify the surface of the paper sheet to a certain extent.

Availability:

Quantity:



Inquire Add to Basket

Model:
Sun Hong PMC
Brand:
sun hong

Product Description

The fiber mesh is formed by needling on both sides of the substrate. The fiber mesh includes a surface layer with a paper surface located on one side of the substrate, an inner layer with a paper surface, and a reverse side located on the other side of the substrate.

The seam unit includes two layers of warp threads and seam rings, the two layers of warp threads are woven on the weft threads respectively, at least part of the warp threads of one layer of the two layers of warp threads pass through the seam ring, and form another layer of warp threads with the warp threads of the other layer of warp threads;

The joint units are connected together by their respective joint rings, the joint rings connected by the two are arranged in sequence along the direction of the weft to form two common holes, and the two common holes are respectively inserted with core wires for joints.

Advantages

网毯_副本

1. Real Export Data in Market
2. Endless or Seam Felt Account for 75% Export Value
3. ≤12 Meters Width available
4. European Technology and Team
5.The Latest Technology quality guaranteed
6.Good faith ,energetic and professional team

Installation of felt

01 Keep the felt clean to prevent oil from sticking to the felt.
02 Before the felt is flattened on each roll, it is not allowed to drop the top press roll, couch roll or support roll. Never pressurize the press roll until the paper machine is running normally.
03 When the felt is running slowly until it is running well, moisten the felt evenly with water until the water is saturated, then adjust the tension to stretch the felts to the optimum length, width and dehydration condition.
04 There shall be sufficient gap between the spoke and the shaft sleeve or between the spoke and the spoke to make the felt easy to cover and avoid pulling the felt in through the gap.
05 Before starting the machine, check whether there are foreign matters on the top and bottom of the felt, as well as pressing and auxiliary devices.
06 The running direction of the felt on the paper machine shall be marked by the arrow on the felt surface.