English  |
Conical refiner is designed to enhance the bonding ability of fibers with a minimized freeness drop and minimum decrease if fiber length with low energy consumption and easy maintenance.
| Quantity: | |
|---|---|
Conical refiner
Conical refiner is designed to enhance the bonding ability of fibers with a minimized freeness drop and minimum decrease if fiber length with low energy consumption and easy maintenance.
Features
1.pulping area is longer than the other. Pulp in pulping area residence time is long, high fiber quality.
2.Have in addition to the sand box, can make some unclean thing was clear in before entering the pulping machine, cut knife grinder damage.
3.The operation is simple, can be directly after DCS system. Replace the knife grinder set of simple, convenient, replacement time is short.
Main Technical Data
Model | DT01 | DT02 | DT03 | DT04 |
Maximum pulp flow(L/min) | 2500 | 4000 | 8000 | 12000 |
Rotor speed(rpm) | 530-1200 | 470-1000 | 370-750 | 300-600 |
Motor power(kw) | 75-315 | 160-500 | 250-900 | 600-1500 |
Operating concentration(%) | 3-6% | |||
Net weight(without motor,kg) | 1300 | 2600 | 3700 | 6700 |
Long(mm) | 1680 | 2300 | 2722 | 2875 |
Wide(mm) | 820 | 840 | 1070 | 1270 |
High (mm) | 1120 | 1070 | 1390 | 1610 |
Conical refiner
Conical refiner is designed to enhance the bonding ability of fibers with a minimized freeness drop and minimum decrease if fiber length with low energy consumption and easy maintenance.
Features
1.pulping area is longer than the other. Pulp in pulping area residence time is long, high fiber quality.
2.Have in addition to the sand box, can make some unclean thing was clear in before entering the pulping machine, cut knife grinder damage.
3.The operation is simple, can be directly after DCS system. Replace the knife grinder set of simple, convenient, replacement time is short.
Main Technical Data
Model | DT01 | DT02 | DT03 | DT04 |
Maximum pulp flow(L/min) | 2500 | 4000 | 8000 | 12000 |
Rotor speed(rpm) | 530-1200 | 470-1000 | 370-750 | 300-600 |
Motor power(kw) | 75-315 | 160-500 | 250-900 | 600-1500 |
Operating concentration(%) | 3-6% | |||
Net weight(without motor,kg) | 1300 | 2600 | 3700 | 6700 |
Long(mm) | 1680 | 2300 | 2722 | 2875 |
Wide(mm) | 820 | 840 | 1070 | 1270 |
High (mm) | 1120 | 1070 | 1390 | 1610 |
