Tissue Paper Machine High Permeability Press Felt

Paper machine press felt is the key to successfully removing moisture from the papermaking process. They are used in the papermaking industry for paper forming, wet pressing, dehydration, and transportation. They play an important role in the performance of the machine, especially in terms of operability.
As THE LARGEST SUPPLIER of PMC paper machine clothing(the northern Jiangsu area), we’re not only sell items, also supply all-in-one solution of PMC. We can provide dryer fabric, forming fabric and felt for you. We can promise you the best rate and professional services.

Availability:

Quantity:



Inquire Add to Basket

Model:
SHC-P1
Brand:
SUN HONG

Product Description

微信图片_20220926112733

Sun Hong press felts are always customer-made to the specifications of each individual paper making machine and position: paper kind, paper machine velocity , dimensions.

With mature technology of press felts, the paper web transfers smoothly to drying section with high dry content and superior quality values. and are marking-free.

Press Felt Structure

BOM felt is composed of a bottom layer and fiber layer. The bottom mesh layer is divided into three types: single-layer, double-layer, and multi-layer. The double-layer bottom mesh is divided into a dual structure and a 1+1 composite structure, while the multi-layer bottom mesh is divided into 1+2 and 2+2 composite structures.

All bottom nets are woven by different weaving methods of warp and weft threads composed of cotton fiber monofilament or monofilament strands. The fiber layer is made up of short cotton fibers of different thicknesses and fineness, which are laid in layers. The combination of the fiber layer and the bottom mesh layer is completed through a needle punching process.

Press Felt Application

Paper machine: dryer cylinder, super forming, foudrinier, inclined wire machine, nip wire machine etc for forming section felt, press felt.

Machine Velocity:≤800m/min Paper:≥8g/㎡ kinds of paper

NIP:≤80kn/m

Parameters

No.	GSM	STRUCTURE	APPLICATION	FELT TRAIT
1	700-800	Single layer,domestic material	Tissue paper	Good filtration
2	700-1100	Single layer,domestic material	Write paper,print paper,newspaper,technical paper,package paper	Good filtration,light trace ,long life
3	700-900	Single layer,domestic material	Corrugating,kraft paper,package paper	Good filtration
4	800-1000	Single layer,domestic material	Kraft paper,white paperboard	Excellent tensile strength,Good filtration
5	800-1000	Single layer,domestic material	Kraft paper,white paperboard	Excellent tensile strength,Good filtration
6	800-1000	Single layer,import material	High-grade write paper,printing paper,technical paper,tissue paper	Good filtration,traceless,flar surface
7	800-1000	Single layer,import material	High-grade write paper,printing paper,technical paper,tissue paper	Good filtration,traceless,flar surface
8	800-1000	Single layer,import material	High-grade write paper,printing paper,technical paper,tissue paper	Excellent tensile strength,Good filtration

微信图片_20220922164349

微信图片_20220922164413_副本

我们1_副本

Packing & Shiping

1.Bubble Film and waste thick fabric wrapping while protecting inside fabric.
2.Wrapped special fabric package outside(Air shipping).
3.Composite wooden box(sea shipping).

毛毯照片5_副本

Installation of felt

01 Keep the felt clean to prevent oil from sticking to the felt.
02 Before the felt is flattened on each roll, it is not allowed to drop the top press roll, couch roll or support roll. Never pressurize the press roll until the paper machine is running normally.
03 When the felt is running slowly until it is running well, moisten the felt evenly with water until the water is saturated, then adjust the tension to stretch the felts to the optimum length, width and dehydration condition.
04 There shall be sufficient gap between the spoke and the shaft sleeve or between the spoke and the spoke to make the felt easy to cover and avoid pulling the felt in through the gap.
05 Before starting the machine, check whether there are foreign matters on the top and bottom of the felt, as well as pressing and auxiliary devices.
06 The running direction of the felt on the paper machine shall be marked by the arrow on the felt surface.