End cap gluing machine
The end cap gluing machine is used for glue injection of upper and lower end cap of rotary filter element.
Working Principle
The glue dispensing system completes glue dispensing and conveying glue to the mixing system according to the instructions issued by the control system, and then quantitatively dispenses glue while mixing. It can be turned off at any time, and the mixing part can be cleaned automatically by inching the switch at any time. At the same time, the three-axis manipulator takes the mixing system part to pour glue while quantitatively positioning the products.
Filter manufacturing process
The finished filter element is put into the shell → the cover plate and the shell are pressed and formed by the can sealing machine (the cover plate needs to be glued with a gluing machine before packaging) → the shell is printed with a silk screen printing machine → leak detector inspection → film sealing machine packaging → carton packaging → put into a tray for storage.
Technical parameters
Diameter Range | Φ60-Φ100mm |
Product Capacity | 20pcs/min |
Hot melt Capacity | 10kg |
Hot melt Machine Heating Power | 6kw |
Conveyer Motor Power | 0.75KW |
Mask Mold Motor Power | 90w |
Working Air Pressure | 0.6Mpa |
Power Supply | 380V/50HZ |
M/C Weight | 450KG |
M/C Dimension | 1600*1900*1400 |
content is empty!