Middle Consistency Hydrapulper
The hydraulic pulper is popular as pulping equipment for paper make. From the structural form, it has vertical hydraulic and horizontal hydraulic type. From the pulp consistency, we could divide it into three types: high,middle and low consistency pulper.
Application
1.This machine of rotating knife and the fixed knife all use special alloy steel,and the material of the special wear-resisting.
2.The sword of turbulence type design, improve the dissociation ability.
3.Rotating knife using high backflow three wraps scroll design, applicable to all kinds of different type of waste paper.
4.Intermittent operation all kinds of pulp board.waste paper,especial for higher wet strength paper.
Main Technical Data
Model | Nominal Volume | Inlet Consistency(%) | Capacity (t/24h) | Motor Power(KW) |
SHM10 | 10 | 4-8 | 50-75 | 75-110 |
SHM15 | 15 | 4-8 | 80-120 | 110-200 |
SHM25 | 25 | 4-8 | 150-250 | 220-400 |
SHM30 | 35 | 4-8 | 250-400 | 400-630 |
Remark:The yield will change with the size variety and concentration. Therefore, the output in the table is only for selection