The forming fabric is an important piece of equipment on the paper machine and is also a commonly used water filtering device in the forming section. Therefore, extending the service life of the forming fabric is of great significance.

Cracked edge: 1. Edge damage caused by poor calibration requires new guide rollers 2. For excessive edge wear, it is necessary to add lubrication and adjust the fixed edge seal 3. If the edge of the vacuum box is too dry, the edge fixing device should be reset and the lubrication should be improved.

1、Check the paper machine carefully before installing the paper forming wire to ensure that the wire is smooth, flat and level in contact with the paper machine.

1.1 Fabric belt deviation caused by installation:1.1.1 The conveyor belt joint is not straight. The tension on both sides of the mesh belt is uneven, and the mesh belt always deviates to the side with large tension. In view of this situation, it can be eliminated by adjusting the tension on both sid