1.1 Fabric belt deviation caused by installation:1.1.1 The conveyor belt joint is not straight. The tension on both sides of the mesh belt is uneven, and the mesh belt always deviates to the side with large tension. In view of this situation, it can be eliminated by adjusting the tension on both sid

As the largest supplier and manufacturer of paper making PMC(north jiangsu area), Sun Hong not only sell items, but also supply all-in-one solution. Press felt is one of our most advantage products, we will provide technical support to hepl customers choose the most suitable and economical item.

Paper felt is a valuable material in the paper industry and can be divided into three main categories: wet felts, top felts and dry felts, which are used to filter the water in the pulp and to closely overlap the wet paper layers in multiple nets. How to Install Felt

Dryer fabric with small ventilation is adapt for the first platoon of the dryer, due to the fresh sheets from pressing sector are in high moisture and low strength to be marking sensitive. The medium ring of spiral dryer fabric should be used in the middle dryers, and for the latter dryer cylinders,

The headbox is a key component of paper making equipment, a hub connecting the two parts of "flow" and "forming", and it is also one of the fastest-growing parts of the paper machine. The function of the headbox is to send the required pulp to the forming wire by the requirements of the forming part