Introduction of related equipment in the corrugated paper production line

The corrugated paper production line includes equipment such as anvil covers, corrugated rolls, mill roll stands, single facers, slitter knives, and sun wheel. Next, let us take a detailed look at the introduction of related equipment in the corrugated paper production line. Here are some answers.

Here is the content list:

• Anvil cover and corrugated roll.

• Mill roll stand and single facer.

• Slitter knife and sun wheel.

Anvil cover and corrugated roll.

The anvil cover in the corrugated paper production line is mainly used in the paper and cardboard industry and has the characteristics of wear resistance, good hardness, high processing accuracy, and longer service life. We can produce customized anvil covers of various sizes, colors, and materials to meet the specific requirements of users. The corrugated roll in the corrugated paper production line is the most important part of the corrugated board production equipment, and also an important key part of the single facer. It is generally made of 48crmoa steel. After surface heat treatment and cold treatment or surface cold treatment, its hardness is generally above HRC55.

Anvil cover

corrugated roll

Mill roll stand and single facer.

The mill roll stand is used as a rolling device for the raw paper of the corrugated paper production line. The corrugated paper clips currently on the market include a frame, a guide rail mounted on the frame, a clamping arm used in conjunction with the guide rail, and a paper chuck mounted on the clamping arm. Its function is to clamp the original paper roller through the clamping arm and the paper chuck head. The single facer is one of the important pieces of equipment of the corrugated paper production line. The mechanical equipment for the production of corrugated core paper single facer is known as the heart of the "corrugated paper production line" in the corrugated packaging industry.

Hydraulic Shaftless Raw Paper Mill Roll Stand

Corrugated Cardboard Single Facer

Slitter knife and sun wheel.

Slitter knives are widely used in single facer or corrugated production lines at home and abroad for slitting corrugated cardboard, as well as various slitting machines. The slitter knives in the corrugated paper production line are extremely sharp and the cutting effect is excellent. The feature of fewer replacement times of slitter knives can greatly improve the production efficiency of the equipment. The pressureless sun wheel in the corrugated paper production line means that the rollers or wheels will not squeeze or damage anything passing above or below the conveyor line. The sun wheel is the geometric shape of the blade-the polyurethane that separates the space, it can bend and move the product without damaging the product, and at the same time can provide cushioning and shock absorption for the product. It has the following advantages. First, it has high strength. Under the hardness of rubber and plastic, their tensile strength and load-bearing capacity are much higher than that of general rubber. Second, it is wear-resistant. Its wear resistance is very good, generally in the range of 0.01-0.10 (cm3)/1.61km, which is about 3-5 times that of rubber. Third, it is resistant to oil. Polyurethane elastomer is a kind of strong polar polymer compound, which has little affinity with non-polar mineral oil and is hardly corroded in fuel oil and engine oil.

Slitter knife

sun wheel

Our official website is www.sunhongpapermachine.com. If you are interested in the products in our corrugated paper production line, please feel free to contact us. Our cost-effective products are being widely used by people.