D-type Hydrapulper
D-type Hydrapulper is more suitable for pulping OCC, commercial waste paper continually or in batch. It can discharge the heavy impurities from a separately settling box so as to protect equipment from damage by heavy partials, and also discharge plastic pieces.
Design Features
New vaux rotor strengthen hydraulic action and discongest fiber more effectively. Suitable for D-shaped vat, the way of generating turbulence in the conventional pulper has been changed, the turbulence is intensified and so the paper bale is quickly soaked into the liquid, in this way the moving path of waste paper in pulper is improved and the capacity of pulper increases. It can shorten the pulping time, reduce energy consumption and increase the specific capacity per unit of volume.
Size: 15m⊃3;~100m⊃3;
Capacity: 80~1000TPD
Main Technical Data
Model | Capacity(t/24h) | Effective Volume(m⊃3;) | Stock Consistency(%) | Motor Power(KW) |
SHD15 | 100-150 | 15 | 3-5 | 165 |
SHD20 | 150-200 | 20 | 3-5 | 185 |
SHD25 | 200-250 | 25 | 3-5 | 220 |
SHD30 | 250-300 | 30 | 3-5 | 280 |
SHD35 | 300-350 | 35 | 3-5 | 315 |
SHD40 | 350-400 | 40 | 3-5 | 355 |
SHD45 | 400-450 | 45 | 3-5 | 400 |
SHD50 | 450-500 | 50 | 3-5 | 450 |
SHD60 | 500-550 | 60 | 3-5 | 560 |
SHD70 | 600-700 | 70 | 3-5 | 630 |
SHD80 | 700-800 | 80 | 3-5 | 710 |
SHD90 | 800-900 | 90 | 3-5 | 900 |
SHD100 | 900-110 | 100 | 3-5 | 1120 |
Remark:The yield will change with the size variety and concentration. Therefore, the output in the table is only for selection