Pulp Pump Non-block and non-leaked pulp pump issuitable for pumping a variety of different media as it is the singlestage,single flow,volute centrifugal pump.It is easy to maintain.When removing orinstalling the impeller,wear-resisting lining, pump cover,shaft sealand bearing frame,you will remove the pump neither from thesuction pipe nor the output pipe because of its process design. Withtwo wear-resisting linings,the front and the back one,it providesthe sufficient protection for pump body and pump cover to prolongits service life.To offer high efficiency, it opens the three-bladeimpeller.
Our Advantages
1. Steel casting
Free from adhering sand, scale, cracks, hot tears or other imperfections.
2. Mechanical Seal
Mechanical seal is made by suitable material, and can endure abrasivewear, corrosive.
3. Coupler and bearing
More bearings and coupler to ensure pumps run smoothly.
4. Motor
Use famous brand electrical motor.
Working Condition
Speed:750,990,1480 and 2960r/min
Voltage:380,6kV or 10Kv
lnlet and outlet diameter:65-500mm ( flange size GB/T17241.6-1998 )
Flow rate: 20-3300m3/h
Head scope:5-100m
Operating temperature: the highest temperature of liquid≤120ºC
The maximum working pressure:1.0MPaor1.6MPa,Specialconfiguration can reach 1.6MPa or 2.5MPa
Acceptable medium: concentration≤6%
English
Pulp Pump 