Publish Time: 2026-10-29 Origin: Site
How can paper mills remove stubborn deposits without damaging their fabrics? Poor cleaning can reduce permeability and shorten fabric life. This guide explains how to clean Paper Machine Clothing safely, choose suitable methods, prevent damage, and maintain reliable production performance.
Before starting any cleaning operation, operators should understand the fabric condition. They should also identify the contamination and check the cleaning equipment. These steps help prevent unnecessary wear and ineffective cleaning.
Paper machines use three main types of clothing. Each performs a different function and faces different contamination risks.
Fabric Type | Machine Section | Main Cleaning Focus |
Forming Fabric | Forming section | Fiber fines, fillers, pitch, and surface deposits |
Press Felt | Press section | Fiber buildup, chemical residues, and mineral deposits |
Dryer Fabric | Dryer section | Dust, fibers, and deposits affecting air permeability |
Forming fabrics support the wet paper web during drainage. Their openings must remain clear for stable water removal.
Press felts absorb and transport water through the press section. Their internal structure must maintain suitable water-handling capacity.
Dryer fabrics support the paper sheet during drying. They also allow air to circulate through the fabric. Therefore, cleaning methods must consider both fabric structure and operating temperature.
Operators should identify the type and location of contamination before choosing a cleaning method. Common deposits include fiber fines, pitch, fillers, coating residues, and mineral scale.
Each contaminant behaves differently. Fiber buildup may collect inside fabric openings. Pitch and stickies can create sticky surface deposits. Mineral scale may form harder deposits that resist ordinary water cleaning.
The inspection should also identify physical damage. Check for broken yarns, damaged seams, edge wear, wrinkles, and surface glazing. These problems cannot always be corrected through cleaning.
Record the affected areas and take photographs. Compare the observations against previous inspection records. This helps distinguish gradual contamination from sudden mechanical damage.
A cleaning system must distribute water evenly across the fabric width. Blocked or misaligned nozzles can create uneven cleaning. They may also leave specific areas exposed to excessive deposits.
Inspect the following components:
· Spray pipes and shower nozzles.
· Water filters and supply lines.
· Oscillating shower mechanisms.
· Vacuum and drainage equipment.
· Chemical dosing and delivery systems.
· Check water pressure, spray coverage, and nozzle condition. Also verify that the drainage system can handle the cleaning water and removed contaminants.
Safety checks should come before any manual cleaning or maintenance work. Moving fabrics, rotating rolls, high-pressure water, and cleaning chemicals present different hazards.
Operators must follow the mill's approved safety procedures. Apply lockout/tagout (LOTO) before accessing equipment that requires isolation. Confirm that hazardous energy sources are controlled.
Wear suitable protective equipment when handling cleaning chemicals. Check safety data sheets and follow the approved handling instructions. Only trained personnel should operate cleaning equipment or perform chemical cleaning.
The correct cleaning process depends on the machine design and fabric condition. Some systems support online cleaning during normal operation. Others require shutdown and equipment isolation.
Operators should follow the equipment manufacturer's instructions. They should also confirm cleaning limits with the clothing supplier.
First, determine whether the cleaning task requires machine shutdown. Routine online cleaning may use an installed automatic shower system. Manual inspection and maintenance require additional safety controls.
Before accessing moving components, isolate the relevant equipment. Apply LOTO and verify zero hazardous energy. Never reach into moving fabrics or approach unguarded rotating rolls.
Remove accessible loose deposits before applying intensive cleaning. Use approved equipment designed for the fabric and machine position. Avoid sharp tools, abrasive brushes, and uncontrolled mechanical contact.
Pay particular attention to edges, seams, and areas near stationary components. These locations may collect fibers and other deposits. Removing loose material also helps prevent contaminants from spreading.
Water cleaning is a common method for removing deposits from Paper Machine Clothing. It can help clear fiber residues and other contaminants from fabric openings.
There are two common approaches:
Continuous shower cleaning: Uses controlled water sprays during normal machine operation.
High-pressure water cleaning: Uses stronger water jets to remove more persistent deposits.
The selection depends on contamination, fabric construction, and equipment design. High-pressure showers require particular attention to nozzle selection and spray coverage.
Needle nozzles produce concentrated water streams. Fan-shaped nozzles provide wider spray coverage. Both can support cleaning when correctly selected and installed.
Operators should check nozzle alignment, spray angle, and oscillation. Water pressure must remain within approved operating limits. Excessive pressure may cause localized wear or damage.
Some deposits cannot be removed effectively through water cleaning alone. Chemical cleaning may help remove pitch, mineral scale, and persistent chemical residues.
The cleaning agent must match the contaminant and fabric material. Depending on the deposit, an approved alkaline or acidic cleaner may be considered.
Before application, confirm the following conditions:
· Chemical compatibility with the fabric materials.
· Recommended concentration and pH range.
· Suitable operating temperature.
· Required contact time.
· Proper rinsing and wastewater treatment.
Never mix cleaning chemicals without verified compatibility. Incorrect chemical selection can weaken yarns or affect fabric stability.
After chemical treatment, remove loosened deposits and residual cleaning agents. Follow the chemical supplier's rinsing instructions.
Check whether drainage systems can handle the wastewater volume. Also inspect surrounding machine components for accumulated contamination.
Incomplete rinsing may leave residues inside the fabric. These deposits can interfere with subsequent operation. Proper wastewater handling also supports environmental compliance.
Cleaning should always be followed by a condition inspection. Operators need to determine whether the treatment actually improved fabric performance.
Check the following indicators:
· Visible deposits and blocked areas.
· Fabric surface condition and uniformity.
· Seam integrity and edge condition.
· Permeability or water-handling performance.
· Drainage and moisture-removal behavior.
Compare measurements against the original operating baseline. Use the same measurement methods and positions whenever possible.
Before restarting the machine, confirm that maintenance work is complete. Remove tools and temporary equipment. Ensure all guards and safety devices are restored.
For offline cleaning, follow the approved installation and startup procedures. Check fabric tension, guiding, and seam conditions before increasing machine speed.
After startup, monitor vacuum stability and sheet moisture. Observe paper quality and any unusual machine behavior. Record the results for future maintenance decisions.
Although all three clothing types require regular cleaning, their structures and operating functions differ. A suitable method for press felt may not work equally well for forming or dryer fabric.
Forming fabric operates under continuous water drainage conditions. Fiber fines, fillers, pitch, and other contaminants can accumulate inside its openings.
Forming fabric cleaning should focus on restoring uniform drainage. Properly adjusted high-pressure showers can remove deposits from the fabric surface and internal structure.
Operators should pay attention to spray coverage across the machine width. Blocked nozzles may create uneven cleaning and localized contamination.
After cleaning, check drainage behavior and sheet formation. Also monitor vacuum conditions and any changes in paper marking.
Press felt removes water from the wet paper web through mechanical pressing. Its internal structure must maintain suitable water-handling capacity.
Fiber buildup, pitch, adhesives, and chemical deposits can restrict water movement. These contaminants may reduce dewatering performance and increase sheet moisture.
Suitable press felt cleaning methods include controlled water showers and approved chemical treatment. Vacuum-assisted water removal may also support conditioning, depending on the equipment arrangement.
Pay special attention to the Uhle box, shower system, and felt edges. Check for glazing, compaction, and uneven contamination after cleaning.
Dryer fabric supports paper transport through the drying section. It also allows airflow through its structure.
Dust, fibers, and other deposits may reduce air permeability. This can affect drying conditions and create uneven moisture profiles.
Use compatible cleaning showers or approved online cleaning systems. Check the seam, fabric edges, and areas exposed to high temperatures.
Some dryer fabric cleaning systems allow cleaning during normal machine operation. However, operators must confirm system compatibility and follow approved safety procedures.
Cleaning priorities by fabric type
Clothing Type | Main Contaminants | Key Performance Indicator |
Forming Fabric | Fiber fines, fillers, pitch | Drainage and permeability |
Press Felt | Fibers, adhesives, chemical deposits | Water-handling capacity |
Dryer Fabric | Dust, fibers, surface deposits | Air permeability |
TIPS: Do not apply one universal cleaning procedure to all three fabric types. Always consider their materials, construction, and machine positions.
Cleaning can improve fabric performance, but incorrect methods may shorten service life. Paper mills should understand common mistakes before changing their cleaning procedures.
Higher pressure does not always produce better cleaning results. An unsuitable spray can damage yarns and accelerate localized wear.
Operators should follow approved pressure settings. They should also check nozzle distance, spray angle, and water coverage.
An unsuitable chemical may attack fabric materials or leave harmful residues. Excessive concentration can also affect fabric performance.
Always identify the contaminant before selecting a cleaning agent. Follow supplier instructions for concentration, temperature, contact time, and rinsing.
Cleaning cannot correct every fabric performance problem. Incorrect tension, poor guiding, and abnormal mechanical contact may cause similar symptoms.
Inspect guide rolls, suction boxes, doctors, and other contact elements. Check for misalignment, vibration, and abnormal wear.
If contamination returns quickly, investigate its source. Repeated cleaning without correcting the cause may increase maintenance costs.
High-pressure water can cause serious injuries. Chemical exposure may also create health and environmental risks.
Never bypass machine guards or safety interlocks. Manual maintenance requires approved isolation and access procedures.
There is no single cleaning frequency suitable for every paper machine. The correct schedule depends on paper grade, machine speed, contamination levels, and fabric condition.
A practical maintenance plan should combine daily inspections, periodic cleaning, and planned shutdown checks.
Operators should inspect cleaning systems during every shift. Check nozzle condition, water coverage, and visible contamination.
They should also monitor changes in drainage and moisture removal. Unusual vacuum fluctuations may indicate cleaning or equipment problems.
Record abnormal conditions before making adjustments. This helps maintenance teams identify problems early.
Periodic cleaning addresses deposits that routine showers cannot remove. The required interval depends on contamination buildup and operating conditions.
Some mills may require more frequent treatment when processing recycled fibers or heavily filled paper grades. Others may need less intensive cleaning under cleaner operating conditions.
Monitor permeability and water-handling performance. Use these measurements to determine whether additional cleaning is necessary.
A planned shutdown provides an opportunity for detailed inspection. Operators can examine fabric areas that are difficult to access during production.
Before cleaning, photograph the fabric surface and both edges. Record deposits, glazing, abrasion, and visible damage.
After cleaning, compare the same areas. Document which deposits disappeared and which problems remained.
Cleaning can restore performance when contamination causes the problem. However, it cannot reverse permanent structural damage.
Paper mills should evaluate fabric condition and operating performance before deciding on replacement.
Some physical problems indicate that cleaning may no longer be effective. Look for these warning signs:
· Broken or severely worn yarns.
· Damaged seams or distorted joints.
· Cracked or heavily worn fabric edges.
· Permanent deformation or uneven thickness.
· Severe abrasion and localized structural damage.
These conditions require technical assessment. Additional cleaning may create further damage without improving performance.
A visual inspection alone cannot confirm successful cleaning. Operators should compare measurable operating indicators.
Important indicators include:
Performance Indicator | What It Helps Evaluate |
Permeability | Whether fabric openings remain functional |
Drainage Rate | Water removal through forming fabric |
Sheet Moisture | Dewatering performance after pressing |
Air Permeability | Airflow through dryer fabric |
Vacuum Requirements | Changes in system operating conditions |
Paper Quality | Formation, moisture uniformity, and surface defects |
Use consistent measurement methods and comparable operating conditions. A temporary improvement may not indicate full performance recovery.
Replacement may become necessary when cleaning no longer restores the required performance. Severe wear, damaged seams, and permanent deformation also require attention. Before making a decision, consider:
· Current fabric condition and operating hours.
· Cleaning frequency and maintenance costs.
· Production losses caused by poor performance.
· Remaining service life and replacement costs.
· Technical recommendations from the fabric supplier.
A technical review can help determine whether continued cleaning remains economical. It can also identify whether the problem comes from fabric condition or another machine component.
TIPS: Keep before-and-after photographs and performance records. They provide useful evidence when discussing repair or replacement with suppliers.
Safe cleaning helps maintain Paper Machine Clothing permeability, drainage, and service life. Proper cleaning methods, chemical selection, and regular inspections prevent unnecessary fabric damage. Different fabric types require suitable cleaning procedures.
About Sun Hong: XUZHOU SUN HONG INTERNATIONAL TRADE CO.,LTD supplies forming fabrics, press felts, dryer fabrics, and online cleaning systems. Its cleaning solutions support efficient contaminant removal and stable paper machine operation.
Contact Us: Click www.sunhongpapermachine.com for suitable clothing products, cleaning equipment, and technical support based on your production requirements.
A: Clean it according to contamination levels, permeability, and operating conditions.
A: Use suitable showers, approved chemicals, and vacuum-assisted cleaning.
A: Fiber fines, pitch, fillers, and mineral deposits block fabric openings.
A: Yes, when pressure, nozzle distance, and spray coverage follow supplier guidelines.
A: Replace it when cleaning cannot restore performance or structural damage occurs.
A: Water removes loose deposits; chemical cleaning targets persistent contamination.