English

فارسی
Melayu
Tiếng Việt
Deutsch
Português
Español
Pусский
Français
العربية
You are here: Home » News » Industry News » Top Paper Machine Clothing Fabrics For Paper Mill

Top Paper Machine Clothing Fabrics For Paper Mill

Publish Time: 2026-11-12     Origin: Site

Can the wrong fabric reduce paper quality and increase production costs? Paper Machine Clothing affects drainage, sheet formation, drying, and machine efficiency.

This guide compares forming fabrics, press felts, and dryer fabrics by structure, performance, and application. Learn key selection factors before choosing fabrics for your paper mill.

What Does Paper Machine Clothing Do in Each Machine Section?

Paper Machine Clothing supports the paper web throughout production. It performs different tasks during forming, pressing, and drying. Understanding these functions helps buyers choose suitable fabric types.

Forming Fabrics for Sheet Formation and Water Drainage

Forming fabrics support the wet paper web during sheet formation. They allow water to pass through while retaining fibers. Their structure affects drainage, formation uniformity, and sheet quality.

A suitable forming fabric balances water removal and fiber retention. Excessive drainage may cause fiber loss or uneven formation. Poor drainage can reduce machine efficiency and affect production speed.

Press Felts for Efficient Dewatering

Press felts receive the wet paper web from the forming section. They absorb and transport water during mechanical pressing. Their structure must withstand repeated compression and recover effectively.

Good press felt performance supports higher sheet dryness after pressing. This can reduce the water load entering the dryer section. It may also lower the energy required for subsequent drying.

Dryer Fabrics for Sheet Support and Drying Efficiency

Dryer fabrics carry the paper web through the dryer section. They provide stable sheet support during heat transfer. Their permeability also allows air to circulate through the fabric.

Suitable dryer fabrics maintain dimensional stability under operating conditions. They must resist heat, tension, and mechanical wear. Proper airflow helps support consistent drying performance.

Which Paper Machine Clothing Fabrics Should Paper Mills Consider?

The best paper machine clothing fabric depends on its machine position and production goals. Different structures provide different levels of drainage and support. The following seven options cover common paper mill requirements.

Single and 1.5 Layer Forming Fabrics

Single-layer forming fabric uses one warp layer and one weft layer. Its relatively simple structure supports water drainage and sheet formation. It can suit machines requiring straightforward drainage performance.

A 1.5-layer design uses two warp layers sharing one weft layer. This structure improves dimensional stability and fiber retention. It also balances sheet support and drainage efficiency.

For medium-speed machines, 1.5-layer fabric offers useful flexibility. Buyers should compare mesh marking, retention, and drainage requirements.

Sun Hong Group

Double and 2.5 Layer Forming Fabrics

Double-layer forming fabric uses multiple yarn systems. Its construction improves fiber support and dimensional stability. It is commonly considered for writing and kraft paper production.

The 2.5-layer design adds another transverse yarn arrangement. This helps improve fine-fiber support and retention. It also maintains suitable drainage performance.

These structures can serve medium- and high-speed machines. Buyers should evaluate paper grade and formation requirements.

Triple Layer Forming Fabrics

Triple-layer forming fabrics use more complex yarn arrangements. Their designs can balance sheet-side support and machine-side wear resistance. They also offer opportunities to optimize drainage and fabric stability.

These fabrics are worth evaluating for demanding production conditions. However, construction details differ between manufacturers. Buyers should compare permeability, retention, and wear characteristics.

They should also confirm compatibility with existing machine configurations.

BOM Press Felts

BOM means Batt-on-Mesh. This structure combines a woven base mesh and synthetic fiber batts. The base supports strength, while the batt manages water transfer.

Single-layer BOM felts suit standard dewatering requirements. Double-layer designs provide additional structure and void volume. Multi-layer and laminated felts address more demanding applications.

The correct option depends on machine speed and nip pressure. Paper grade and required sheet dryness also matter.

Sun Hong Group+1

Pulp Board Felts

Pulp board felts serve demanding board and pulp applications. They are designed for water removal under pressing conditions. Their construction must support pressure and maintain sheet integrity.

Common structures include single-layer BOM and double-layer BOM. BOB means Batt-on-Batt and uses multiple batt layers. Each design offers different drainage and surface characteristics.

Seamed and endless configurations also affect installation. Buyers should confirm the suitable structure for their machine.

Sun Hong Group

Woven Dryer Fabrics

Woven dryer fabrics use interlaced yarns to create an open structure. They support the paper web during drying. Their permeability allows air to pass through the fabric.

Round-yarn and flat-yarn designs offer different structural characteristics. Selection depends on machine conditions and airflow requirements. Heat resistance and dimensional stability are also important.

Buyers should consider temperature and moisture exposure. They should also check seam design and cleaning needs.

Spiral Dryer Fabrics

Spiral dryer fabrics use connected spiral loops. Their construction provides an open structure for airflow. They also support paper transportation through the dryer section.

Different spiral designs can meet different machine requirements. Material selection affects thermal and chemical resistance. Buyers should compare permeability, seam configuration, and mechanical stability.

Confirm the fabric design against dryer section conditions.

TIPS: No single fabric structure suits every paper machine. Always compare its technical specifications against actual production conditions.

Which Fabric Features Have the Greatest Impact on Performance?

Fabric construction alone does not determine production results. Buyers should evaluate several technical properties together. These characteristics influence paper quality and machine efficiency.

Drainage Capacity and Fiber Retention

Drainage capacity determines how quickly water leaves the paper web. Fiber retention measures how effectively the fabric holds fibers. Both properties influence sheet formation and raw material use.

Very rapid drainage may not suit every paper grade. Fine fibers require adequate support during formation. Buyers should balance drainage and retention requirements.

Permeability and Water-Handling Capacity

Permeability describes how easily fluid or air passes through fabric. Forming fabrics mainly require controlled water drainage. Press felts need effective water absorption and transport.

Dryer fabrics require suitable airflow through their structure. Their permeability influences ventilation around the paper web. Uniform performance across the width also matters.

Wear Resistance and Dimensional Stability

Wear resistance affects fabric durability during continuous operation. Mechanical friction and repeated loading cause gradual deterioration. Suitable yarn materials and construction help manage these stresses.

Dimensional stability helps maintain consistent fabric tracking. It also reduces problems caused by stretching or distortion. Buyers should evaluate both properties together.

These characteristics influence the expected paper machine clothing service life. However, actual results depend on operating conditions. Supplier recommendations should support the final selection.

Surface Quality, Cleanliness, and Thermal Resistance

Fabric surface characteristics influence sheet marking and smoothness. Contamination can also affect permeability and production stability. Suitable materials help maintain consistent operating conditions.

Dryer fabrics face additional heat and moisture exposure. Hydrolysis resistance is important in demanding dryer environments. Material selection should reflect actual operating temperatures.

How Do Fabric Types Match Different Paper Grades?

Paper grade influences the required fabric performance. Different products have different formation and dewatering needs. Buyers should match fabric construction to production targets.

Fabrics for Tissue and Lightweight Paper

Tissue production requires careful sheet formation and water removal. Forming fabrics must support fine fibers and uniform formation. Press felts must provide suitable dewatering and sheet handling.

Surface marking is another important consideration. Buyers should evaluate batt fineness and fabric construction. Dryer fabrics must also support stable sheet transportation.

Fabrics for Writing and Printing Paper

Writing and printing papers require consistent sheet formation. Fiber retention and surface uniformity are important. Double-layer and 2.5-layer forming fabrics deserve consideration.

Press felts should support uniform dewatering. Their surface characteristics can influence paper smoothness. Suitable dryer fabrics help maintain stable drying conditions.

Fabrics for Kraft and Packaging Paper

Kraft and packaging papers often involve demanding production conditions. Forming fabrics need suitable drainage and mechanical stability. Press felts must handle the required dewatering load.

Double-layer forming fabrics can support these applications. BOM press felts offer different construction options. Selection should reflect machine speed and paper weight.

Fabrics for Pulp Board and Heavy Board Production

Heavy board production places significant demands on dewatering. Press felts must handle high mechanical loading. They should also maintain suitable water-handling capacity.

Pulp board felts offer different base and batt structures. BOM and BOB designs serve different application requirements. Confirm pressure resistance and surface requirements before ordering.

Paper Grade

Fabric Selection Focus

Important Properties

Tissue

Forming fabric and press felt

Retention, drainage, surface quality

Writing Paper

Double-layer forming fabric

Formation, stability, smoothness

Kraft Paper

Forming fabric and BOM felt

Drainage, strength, durability

Packaging Board

Multi-layer forming fabric and press felt

Dewatering, pressure resistance

Heavy Board

Pulp board felt

Water handling, structural stability

How to Select Paper Machine Clothing for Your Machine?

Selecting suitable clothing starts with accurate machine information. Buyers should evaluate the complete production environment. This helps avoid incorrect specifications and unnecessary costs.

Match Fabric Construction to Machine Configuration

First, identify the machine section requiring new clothing. Confirm whether it is forming, press, or dryer equipment. Then review the existing fabric construction and installation position.

Different machine designs require different fabric configurations. Fourdrinier and cylinder mould machines have different requirements. Confirm the machine type before requesting recommendations.

Consider Machine Speed and Operating Conditions

Machine speed influences mechanical loading and fabric requirements. Press felts must match nip conditions and pressure. Dryer fabrics must withstand operating temperatures and moisture.

Forming fabrics require suitable stability and drainage performance. Consider vacuum conditions and cleaning systems. These details help suppliers recommend suitable constructions.

Evaluate Paper Grade and Production Targets

Confirm the paper grade and basis weight range. Identify requirements for smoothness and sheet formation. Also consider drainage and final moisture targets.

Production targets may involve speed or quality improvements. Explain these priorities clearly to the supplier. This helps balance performance and operating costs.

Confirm Fabric Dimensions and Installation Requirements

Accurate dimensions are essential for proper installation. Confirm fabric width, length, and circumference. Also specify seam type and joining requirements.

Check material, yarn diameter, and layer construction. Confirm permeability and other required technical properties. Provide existing fabric samples when available.

TIPS: Prepare a machine specification sheet before requesting quotations. Include operating speed, paper grade, dimensions, and current fabric data.

How Do the Main Fabric Options Compare?

Understanding structural differences helps buyers narrow their choices. Each fabric category serves a different production function. Comparisons should focus on application requirements rather than rankings.

Forming Fabric vs. Press Felt vs. Dryer Fabric

Forming fabrics support initial sheet formation and drainage. Press felts remove water through mechanical compression. Dryer fabrics support the sheet during thermal drying.

Their structures and performance indicators are different. Forming fabrics focus on retention and drainage. Press felts focus on dewatering and compression recovery. Dryer fabrics focus on airflow and thermal stability.

Single-Layer vs. Multi-Layer Fabric Structures

Single-layer fabrics have simpler yarn arrangements. They may suit less demanding formation requirements. Multi-layer structures offer more design flexibility.

They can balance fiber support and machine-side durability. However, additional layers do not guarantee better performance. Buyers must compare actual specifications and production needs.

Woven vs. Spiral Dryer Fabrics

Woven dryer fabrics use interlaced yarn structures. Spiral fabrics use connected spiral loops. Both support sheet transportation and dryer operation.

Their airflow and installation characteristics may differ. Woven designs offer different yarn and weave options. Spiral designs require attention to loop structure and joining.

The machine configuration determines the suitable option. Confirm permeability and operating conditions before ordering.

Comparison

Main Advantage

Selection Consideration

Forming Fabric

Supports sheet formation

Drainage and fiber retention

Press Felt

Supports mechanical dewatering

Water handling and compression

Dryer Fabric

Supports drying and transport

Airflow and heat resistance

Single Layer

Simpler construction

Machine speed and formation needs

Multi-Layer

Flexible performance design

Required retention and stability

Woven Dryer

Interlaced yarn construction

Weave and permeability

Spiral Dryer

Spiral-loop construction

Airflow and seam configuration

What Should Buyers Check Before Ordering Paper Machine Clothing?

A suitable product must meet both technical and commercial requirements. Buyers should review specifications before confirming an order. Supplier communication also helps prevent installation problems.

Review Technical Specifications and Product Compatibility

Request a complete technical specification sheet. Confirm dimensions, material, construction, and permeability. Check whether the fabric suits the machine position.

Also review seam design and mechanical properties. Compare specifications against the existing installation. Avoid relying only on product names or general descriptions.

Evaluate Manufacturing Quality and Testing

Ask suppliers about raw material control. Review weaving, needling, and finishing processes. Request relevant inspection and testing documents.

Useful checks may include dimensional accuracy and permeability. Tensile strength and thickness may also matter. Testing methods should be clear and consistent.

Compare Total Operating Costs

Purchase price is only one cost factor. Consider expected service life and replacement frequency. Include installation time and production downtime.

Cleaning requirements may also affect operating costs. Better dewatering can influence downstream energy demand. Compare total operating value rather than initial price alone.

Consider Supplier Customization and Technical Support

A capable supplier should understand paper machine applications. Ask about fabric selection and customization support. Confirm whether technical guidance is available.

Discuss installation, commissioning, and troubleshooting arrangements. Review communication and delivery capabilities. These factors support long-term purchasing decisions.

Sun Hong lists forming fabrics, press felts, and dryer fabrics in its product portfolio. Its website also describes production, testing, design, and technical support services.

Sun Hong Paper Machine company+1

Conclusion

Suitable Paper Machine Clothing depends on paper grade, machine conditions, and production targets. Forming fabrics, press felts, and dryer fabrics serve different production stages.

Compare fabric construction, permeability, and durability before purchasing. Suitable fabrics support stable production.

About Sun Hong: XUZHOU SUN HONG INTERNATIONAL TRADE CO.,LTD supplies forming fabrics, BOM press felts, pulp board felts, and woven and spiral dryer fabrics. Customizable products and technical support help mills match fabrics to machine requirements.

Contact Us: Contact Sun Hong www.sunhongpapermachine.com to discuss suitable fabric solutions.

FAQ

Q: What are the main types of Paper Machine Clothing?

A: The main types include forming fabrics, press felts, and dryer fabrics.

Q: Which Paper Machine Clothing is suitable for tissue paper mills?

A: Forming fabric for tissue paper machines supports fiber retention, drainage, and sheet formation.

Q: What is the difference between forming fabric and press felt?

A: Forming fabric drains water during sheet formation. Press felt removes water through mechanical pressing.

Q: How do paper mills choose the best Paper Machine Clothing?

A: Consider paper grade, machine speed, permeability, fabric structure, and operating conditions.

Q: Are woven and spiral dryer fabrics interchangeable?

A: No. Woven and spiral dryer fabrics have different structures and installation requirements.

Q: What should buyers expect from a Paper Machine Clothing supplier?

A: A reliable supplier should provide customized specifications, quality testing, product compatibility, and technical support.

Established in 2010, Sun Hong Group is Chinese leading manufacturer of paper machine clothing including press felt, forming fabrics and dryer screen. Rely on our customers' trust we expanded our businnes, control serveral factory to manufacture and supply almost all the sapre parts for pulp and paper making machine.....
Copyright© Sun Hong Group   

Contact Us

  +86 139 5134 9332
Office:  A2 building YunChuang science and technology park Pinshannan road Gulou district Xuzhou city Jiangsu province China
Factory:  The 5th Building No 241 Huai Hai West Road China