English  |
| Quantity: | |
|---|---|
SUN HONG PMC
SUN HONG
59119000
Crescent paper machine forming wire design requirements
Because the Crescent toilet paper machine does not have water needle edge trimming equipment, the width of the paper web needs to be determined by the rubber edge of the forming wire. The stability of the forming wire is particularly important, and it must also provide excellent paper evenness. High retention effect.
The difference between the SSB2/4B67/63 new SSB three-layer network designed by Sun Hong and the conventional SSB three-layer network is that the warp adopts a 3:2 weaving method, while the conventional SSB three-layer network has a warp ratio of 1:1. This design The advantage is that it can provide better fiber support on the paper sheet of the forming wire, which can help the paper machine to bring good sheet formation and provide good retention effect at the same time. The conventional SSB three-layer mesh tends to sacrifice the water filtration effect of the forming mesh when improving the retention effect, but the SSB2/4B67/63 type three-layer mesh designed by Sun Hong makes up for this defect. When providing high retention effect. It can also provide high air permeability and improve the dehydration effect of the mesh part.
In order to make the forming wire have better stability, all the raw materials produced by Sun Hong use monofilament raw materials from PERLON company in Germany, and all the production equipment is also from JAGER company in Germany. The production workshop is full-time constant temperature and humidity production.
Crescent paper machine forming wire design requirements
Because the Crescent toilet paper machine does not have water needle edge trimming equipment, the width of the paper web needs to be determined by the rubber edge of the forming wire. The stability of the forming wire is particularly important, and it must also provide excellent paper evenness. High retention effect.
The difference between the SSB2/4B67/63 new SSB three-layer network designed by Sun Hong and the conventional SSB three-layer network is that the warp adopts a 3:2 weaving method, while the conventional SSB three-layer network has a warp ratio of 1:1. This design The advantage is that it can provide better fiber support on the paper sheet of the forming wire, which can help the paper machine to bring good sheet formation and provide good retention effect at the same time. The conventional SSB three-layer mesh tends to sacrifice the water filtration effect of the forming mesh when improving the retention effect, but the SSB2/4B67/63 type three-layer mesh designed by Sun Hong makes up for this defect. When providing high retention effect. It can also provide high air permeability and improve the dehydration effect of the mesh part.
In order to make the forming wire have better stability, all the raw materials produced by Sun Hong use monofilament raw materials from PERLON company in Germany, and all the production equipment is also from JAGER company in Germany. The production workshop is full-time constant temperature and humidity production.
