Tissue Paper Machine Single Layer Press Felt

Press felt is an important consumable material in the paper industry and one of Sun Hong main sales products, used for the transportation and dehydration of wet paper for board machines.Sun Hong As the largest supplier of PMC paper machine clothing in northern Jiangsu, we not only provide you with forming fabrics, felts, and dryer fabrics, but also provide PMC integrated solutions, giving you the most favorable prices and professional services

Availability:

Quantity:



Inquire Add to Basket

Model:
Sun Hong PMC
Brand:
SUN HONG

Product Description

Press felt can be divided in seamed press felt、endless press felt、pick up felt、MG press felt、shoe press felt、crescent tissue felt、BOM felt etc.

Single layer press felt Features and Applications：

Small elongation, light carpet marks, good water filtration performance and long life. It is suitable for paper machines such as cylinder former paper machine, two-wire foundrinier machine, inclined wire machine, fourdrinier wire, etc. And it is widely used in the production of various papers.

Sun Hong has a professional technical team to serve you at all times. According to the information and data you provide, we will provide you with a series of solutions. We will respond within 24 hours to any problems during the use of the product.

Product parameter

No	GSM	Structure	Application
1	700-800	single layer, domestic material	tissue paper
2	700-1100	single layer, domestic material	wrinting paper, printing paper, newspaper, package paper, technical paper
3	700-900	single layer, domestic material	corrugating, kraft paper, package paper
4	800-1000	single layer, domestic material	kraft paper, white paperboard
5	800-1000	single layer, domestic material	kraft paper, white paperboard
6	800-1000	single layer, import material	high-grade writing paper, printing paper, technical paper,tissue paper
7	800-1000	single layer, import material	high-grade writing paper, printing paper, technical paper, tissue paper
8	800-1000	single layer, import material	high-grade package paper, kraft paper, paperboard

微信图片_20220922164349

Our factory

Installaion of felt

01 Keep the felt clean to prevent oil from sticking to the felt.
02 Before the felt is flattened on each roll, it is not allowed to drop the top press roll, couch roll or support roll. Never pressurize the press roll until the paper machine is running normally.
03 When the felt is running slowly until it is running well, moisten the felt evenly with water until the water is saturated, then adjust the tension to stretch the felts to the optimum length, width and dehydration condition.
04 There shall be sufficient gap between the spoke and the shaft sleeve or between the spoke and the spoke to make the felt easy to cover and avoid pulling the felt in through the gap.
05 Before starting the machine, check whether there are foreign matters on the top and bottom of the felt, as well as pressing and auxiliary devices.
06 The running direction of the felt on the paper machine shall be marked by the arrow on the felt surface.